capytaine.io.mesh_writers module

Functions to write mesh to different file formats. Based on meshmagick <https://github.com/LHEEA/meshmagick> by François Rongère.

capytaine.io.mesh_writers.write_DAT(filename, vertices, faces)

Writes .DAT file format for the DIODORE (PRINCIPA (c)) software.

It also displays suggestions for inclusion into the .INP configuration file.

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

capytaine.io.mesh_writers.write_GDF(filename, vertices, faces, ulen=100.0, gravity=9.81, isx=0, isy=0)

Writes .gdf file format for the WAMIT (Wamit INC. (c)) BEM software.

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

• ulen (float, optional) – length scale. The default is 100.0

• gravity (float, optional) – acceleration of gravity. The default is 9.81

• isx ({0, 1}, optional) – symmetry in x-axis. The default is 0

• isy ({0, 1}, optional) – symmetry in y-axis. The default is 0

capytaine.io.mesh_writers.write_HST(filename, vertices, faces)

Writes .HST file format for the HYDROSTAR (Bureau Veritas (c)) software.

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

capytaine.io.mesh_writers.write_INP(filename, vertices, faces)

capytaine.io.mesh_writers.write_MAR(filename, vertices, faces)

Writes mesh files to be used with Nemoh BEM software (Ecole Centrale de Nantes)

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

capytaine.io.mesh_writers.write_MED(filename, vertices, faces)

capytaine.io.mesh_writers.write_MSH(filename, vertices, faces)

capytaine.io.mesh_writers.write_NAT(filename, vertices, faces)

Writes .nat file format as defined into the load_NAT function.

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

See also

load_NAT

capytaine.io.mesh_writers.write_NEM(filename, vertices, faces)

Writes mesh files used by the Mesh tool included in Nemoh

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

Note

This file format is different from that used by Nemoh itself. It is only used by the Mesh tool.

capytaine.io.mesh_writers.write_RAD(filename, vertices, faces)

capytaine.io.mesh_writers.write_STL(filename, vertices, faces)

Writes .stl file format. It relies on the VTK library for its writer.

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

capytaine.io.mesh_writers.write_TEC(filename, vertices, faces)

Writes .TEC file format for the TECPLOT (Tecplot (c)) visualisation software.

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

capytaine.io.mesh_writers.write_VTK(filename, vertices, faces)

Writes .vtk file format for the Paraview (Kitware (c)) visualisation software.

It relies on the VTK library for its writer. VTK files use the legagy ASCII file format of the VTK library.

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

capytaine.io.mesh_writers.write_VTP(filename, vertices, faces)

Writes .vtp file format for the Paraview (Kitware (c)) visualisation software.

It relies on the VTK library for its writer. VTP files use the last XML file format of the VTK library and correspond to polydata.

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

capytaine.io.mesh_writers.write_VTU(filename, vertices, faces)

Writes .vtu file format for the paraview (Kitware (c)) visualisation software.

It relies on the VTK library for its writer. VTU files use the last XML file format of the VTK library.

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

capytaine.io.mesh_writers.write_WRL(filename, vertices, faces)

capytaine.io.mesh_writers.write_mesh(filename, vertices, faces, file_format)

Driver function that writes every mesh file file_format known by meshmagick

Parameters:

• filename (str) – name of the mesh file to be written on disk

• vertices (ndarray) – numpy array of the coordinates of the mesh’s nodes

• faces (ndarray) – numpy array of the faces’ nodes connectivities

• file_format (str) – file_format of the mesh defined in the extension_dict dictionary